LCR Meter SR715 and SR720 from SRS

The SR715 LCR Meter and SR720 LCR Meter measure passive components with as little as 0.05 % error. These easy-to-use instruments are quick to setup, adjust and calibrate.

LCR Meter SR715 and SR720 from SRS

The SR715 and SR720 are ideal for applications such as incoming inspection, quality control, automated test, and general benchtop use.

LCR Meter SR715 and SR720 from SRS

SR715 and SR720 have built-in features to aid in component sorting. This is especially useful for production testing, incoming inspection, device matching, or when you need to test multiple devices of similar value. The meters allow you to sort components into as many as ten different bins.

Features Include

  • 0.05 % basic accuracy (SR720), 0.2 % (SR715)
  • 5-digit display of L, C, R and Q or D
  • Test frequencies to 100 kHz (SR720)
  • Up to 20 measurements per second
  • Binning and limits for parts sorting
  • External capacitor bias up to 40 V
  • RS-232, GPIB and Parts handler interfaces

Stanford Research Systems, Inc

Scientific Instruments, Vacuum & Analytical Instruments, Time & Frequency Instruments. Test & Measurement for Research and Analysis

DLM2000 Series Digital Oscilloscopes Yokogawa

The DLM2000 is a bench-top oscilloscope for electronic design or debug.  It’s ergonomic and easy to use, and packed with features.

DLM2000 Series Digital Oscilloscopes Yokogawa

The flexible MSO input lets you measure both, including mixed signal triggers and decoding of parallel or serial bit patterns.

DLM2000 Oscilloscopes Yokogawa

Using logic input, up to 11 input signals can be observed simultaneously as 3 ch of analog and 8-bit logic. It is not only possible to use logic input for observation of data and control signals, or as a trigger source, but also for logic

Yokogawa – Test and Measurement

The product range includes digital oscilloscopes, energy/power analyzers, data acquisition systems and Optical Instruments like Optical Spectrum Analyzers and Optical Reflectometer.

Updated July 2013

Programmable Impedance LCR Meter 3525 – Tegam

Low-cost, high-accuracy impedance parameter testing. The instrument measures L, C, R, RP, RS, |Z|, D, Q, Phase, V & I starting at a basic accuracy of 0.08%. It is designed for manual or remote operation and is very simple to use.(This product may be inactive)

Programmable Impedance LCR Meter 3525 - Tegam

Programmable Impedance LCR Meter 3525 – Tegam

Features Include

  • Basic Accuracy: 0.08%
  • Measurement Speed: 15 mS
  • Test Frequencies: 120 Hz, 1 kHz
  • Extremely Compact Size (8″w x 4″h x 7″d)
  • Built-in comparator with audible signal
  • Highly visible dual displays
  • Standard RS-232 and I/O Interfaces

Tegam – Calibration – Test and Measurement

TEGAM, Inc. is a privately held company specializing in the manufacture and support of a wide variety of test, measurement, and calibration instruments. The company was founded in 1979 by Terry Gambill.

TEGAM Inc.
10 Tegam Way Geneva, Ohio 44041, USA.