PS300 Series – High Voltage Power Supply – SRS

Industry standard HV Precision Lab power supplies with up to 20 kV output capability. GPIB and RS-232 computer interfaces are standard on all 10 W supplies.

All of the instruments are arc and short-circuit protected with separate programmable hard and soft current limits, making it possible to use them as constant current sources.

PS300 Series – High Voltage Power Supply – SRS

PS300 Series - High Voltage Power Supply - SRS

The PS310, PS325 and PS350 are dual-polarity, 25 W supplies, while the PS355, PS365, PS370 and PS375 are single-polarity, 10 W supplies. All of the instruments are arc and short-circuit protected with separate programmable hard and soft current limits, making it possible to use them as constant current sources.

Specs Include

  • 1 volt resolution
  • 0.001 % regulation
  • 0.05 % accuracy
  • Programmable limits and trips
  • 0.0015 % ripple

Stanford Research Systems, Inc.
1290-D Reamwood Avenue, Sunnyvale, CA 9408, USA.

Martel Electronics – Process Control Calibrators

Manufacturer of test and measurement equipment, including calibrators. These products are used in the installation and maintenance of industrial instrumentation and OEM applications.

Martel Electronics – Process Control Calibrators

Products Include – Bench Calibrators, Calibration Pumps, Current Calibrators, Gauge Calibrators, Pressure Calibration Gauge, Temperature Pressure calibrators, Multifunction Calibrators, HART Communicator and Documenting Calibrator.

3001 Lab Standard Multi-Function Precision Bench Calibrator

The Martel 3001 multi-function precision bench calibrator provides the power and features of calibrators costing thousands more. It combines the simulation and measurement of voltage, current, thermocouple, RTD and pressure with a second completely isolated measurement channel for an instrument unmatched in versatility, performance, and value.

Martel Electronics - Process Control Calibrators

The 3001 provides simple, front-panel entry of mode, range, and value, using either direct key-board entry or cursor entry. Using cursor entry , the LEFT/RIGHT arrow keys are used to move the cursor under the digit in the display to be changed.

Martel Electronics Corp
3 Corporate Park Dr, Unit 1, Derry, NH 03038, USA.

TTi – Thurlby Thandar Instruments

Designs and manufactures advanced electronic test and measurement equipment. Products they make include Power Supplies, Programmable power supply, Function generator, Arbitrary generator, Pulse generators, RF spectrum analyzer, DMM, LCR Meter and harmonic analyzers.

TTi – Thurlby Thandar Instruments

The LD400 is an inexpensive 400 watt electronic load which is suitable for testing and characterising a wide variety of dc power sources.

LD400 – DC Electronic Load – TTi

Its wide voltage/current range, multiple operating modes and built-in transient generator give it the versatility to offer test solutions from the design laboratory through to the component test area.

LD400 - DC Electronic Load - TTi

The LD400 can operate at voltages below 500mV for currents up to 10 amps. At higher currents the fixed minimum resistance (typically better than 25milliOhms) gradually raises the minimum operating voltage, but it remains below 1 volt up to 40 amps and below 2 volts up to 80 amps.

Aim and Thurlby Thandar Instruments,
Glebe Road, Huntingdon, Cambridgeshire PE29 7DRĀ  England (United Kingdom)