Measures pH, ORP (mV/Rel. mV), and temperature(°C or F). The large display is easy to read even at a distance and features stability indication. The meter includes auto-buffer recognition for both USA and NIST pH buffer sets, automatic or manual temperature compensation, temperature in °F or °C, and display Hold.
pH 2700 Benchtop Meter- OAKTON Instruments
Each meter includes a convenient slide-out calibration card for quick reference. All models (except for DO 2700) include an electrode arm and metal bracket which can be easily attached to the left or right side of the meter according to your preference.
- pHRange -2.000 to 20.000
- mVRange -2000.0 to 2000.0
- TemperatureRange 32 to 212°F (0.0 to 100.0°C)
- Up to 500-point memory with date-time stamp for GLP
- Calibration-due alarm let you know when to recalibrate
- Audible alarms alert you when reading fall out of range
- Output data to either printer or PC
From – OAKTON Instruments
The 6309POT pH/ORP Analyzer and Controller is an easy to use instrument that measures, analyzes, and controls pH, ORP, and temperature.
The 6309POT’s built-in temperature and automatic temperature compensation (ATC) functions may be used with an ATC-type sensor or with a 10K ohm thermistor.
The Global Water 6309POT multiparameter pH/ORP Controller measures, analyzes, and controls pH, ORP and temperature in one easy to use unit. The pH/ORP Controller’s setup and calibrations are done through a user-friendly menu that may be password protected.
Calibrations can be performed quickly and accurately with automatic buffer recognition of U.S. or European buffer sets, with the values stored in the pH/ORP Controller’s nonvolatile memory. A large backlit display on the pH/ORP Controllers provide pH, ORP, and temperature plus the current mA output and relay status.
Global Water, founded in 1990, is a manufacturer, distributor, and systems integrator of water instrumentation serving the water, wastewater, and environmental markets.
Global Water Instrumentation
PO Box 9010, College Station, TX 77842, USA.
“MS-200 is a portable, battery powered mass spectrometer for gas analysis entirely contained in a single case. MS-200 transports the advantages of mass spectrometry – good specificity for the identification of unknowns, versatility, accuracy and sensitivity – from the laboratory into the field. MS200”
Portable Mass Spectrometer – Kore Technology
“Detection and analysis of volatile and semi-volatile organic contaminants(VOCs) on remediation sites – as a fast and cost effective screening process prior to site renewal.”
Data is displayed on a notebook PC, using the Windows® based GRAMS/AI software from Thermo Galactic Corporation. This industry standard software has been customised by Kore to make the collection of spectra a simple press of a virtual button.
Real Time Operator Exposure to Benzene during Refuelling of Petrol Vehicles
Kore Technology Ltd.
Cambridgeshire Business Park, Ely, Cambridgeshire, CB7 4EA, U.K.
Single platform for optimized near-infrared (NIR) and optimized mid-infrared (MIR) spectroscopy in a single, research-grade instrument.
Frontier FT-IR/FIR Spectrometers – PerkinElmer
Factory-fitted or upgraded as application needs change, the unique automated range changing capability allows multiple techniques to be used at the touch of a button.
Extend your IR capabilities into the FIR region using a single optical bench. The automatic beam-splitter changeover delivers a new level of simplicity for far-IR measurements. The built-in system
flexibility is perfectly suited to demanding research environments where experiments require customized components.
PerkinElmer – Human and Environmental Health
Life and Analytical Sciences and Optoelectronics. Design, manufacture and support advanced scientific research and technology solutions. These are used in Health, safety and environmental quality Labs. Labs and Agencies that test and moderate clean water and air, ensure safety in food and toys too.
Intelligent Instrumentation specializes in hardware and software for PC Data Acquisition. Some Products include solutions for Automation & Control, Digital I/O, Analog I/O, Ethernet I/O, EDAS (Ethernet Interface) and UDAS (USB Interface).
Intelligent Instrumentation – Data Acquisition
“Open architecture for easy implementation and deployment into existing and future IT infrastructures. It is exceptionally rugged, has no moving parts, and can be environmentally sealed against dust and water.”
LANpoint Power X Shop Floor Data Collection Terminals
“The open architecture and exceptional input/output device connectivity – serial, USB, bluetooth, direct Ethernet, even many digital I/O channels for switch sensing, counting, relay activating”
Easy to integrate, use and support, these data collection terminals are ideal for data capture and communications solutions for factory floor or other commercial environment.
Intelligent Instrumentation Inc.
3000 E. Valencia Road, Suite 100, Tucson, Arizona 85706 USA
PC-based data acquisition hardware and software. Solutions for Temperature, Vibration, Strain Gage and Mixed Signal in PCI, Rack, Standalone and portable types. Ethernet, USB and Wireless Interfacing.
Measurement Computing – Data Loggers
Here is a complete system, it comes with TracerDAQ an Out-of-the-Box Virtual Instrument Suite. Acquire, analyze, display data, and generate signals within minutes.
WLS-TC-ValuePack from Measurement Computing
Includes WLS-TC (wireless-based 8-channel thermocouple input module) plus WLS-IFC (USB-to-wireless interface module)
Measurement Computing Corporation
10 Commerce Way, Norton, MA 02766, USA
A leading supplier of data acquisition hardware and software systems for PCs. They have Starter Kits like the e DI-145 a low-cost starter kit.
DATAQ Instruments – Data Acquisition
Products the deal with include Data Loggers, Temperature and Humidity Data Loggers, PLC Data Acquisition Solutions, USB Data Loggers and Wireless Data Loggers.
The Ethernet Data Acquisition and Isolated Industrial Ethernet Data Acquisition are useful Industrial Solutions.
DI-718B Data Logger shown above operate Stand-alone or PC-connected.
The DI-718B is an eight-channel, DI-8B module data logger system. Each DI-718B accepts up to eight high-performance, plug-in (DI-8B) signal conditioning modules to include virtually any isolated, industrial-type signal. Because DI-8B modules are identical in pinout and size, they can be mixed or matched in any combination. Choose from thermocouple, true rms, voltage, strain, frequency, process current, RTD, potentiometric, or DC transducer-whatever suits your application. A erasable sticker on the top of the instrument allows easy identification of all installed DI-8B modules.
Ethernet Data Acquisition – DATAQ
These Use the DI-715B Series with 5B style isolated amplifier modules or the DI-718B Series with 8B style isolated amplifier modules for fully isolated industrial signal conditioning applications. Over 90 module types provides a wide variety of measurement functions and ranges. Modules may be mixed and matched to specifically meet your application.
DATAQ Instruments, Inc.
241 Springside Drive Akron, OH 44333, USA.