Yokogawa – Test and Measurement

The product range includes digital oscilloscopes, energy/power analyzers, data acquisition systems and Optical Instruments like Optical Spectrum Analyzers and Optical Reflectometer.

Yokogawa – Test and Measurement

Yokogawa also has sources and signal generators to configure a high speed test and measurement system. Portable and Handheld Instruments for field use like DMM, Insulation tester, Lux meter and more.

DL850E ScopeCorder

The DL850E ScopeCorder is a powerful portable data acquisition recorder and oscilloscope that can capture and analyze both transient events and trends up to 200 days.

DL850E ScopeCorder

A ScopeCorder provides a wide variety of unique acquisition features to handle small or large amounts of data. Therefore it can perform multi-channel measurements for longer measurement periods while still being able to precisely capture transient events with the highest detail.

Hioki – Electronic Measurement Instruments

HIOKI products – Automatic Test Equipment, Memory Recorders, Field Measurement Instruments, Electronic Measurement Instruments.

Hioki – Electronic Measurement Instruments

Hioki portable battery testers support the maintenance of UPS and storage batteries critical to the life support of all businesses.

Battery Tester - BT3554 - Hioki

Not only can you view the data you loaded from the BT3554 into a tablet, smartphone, or PC in ledger format, you can also graph the data to display it by cubicle (up to 500 data sets). Then, instantly create reports on-site.

Battery Tester – BT3554 –┬áHioki

The BT3554-01 is built-in with Bluetooth wireless technology for managing data on mobile devices.

HIOKI E.E. CORPORATION
81 Koizumi Ueda, Nagano 386-1192 Japan

Pickering Interfaces – Test and Measurement

A company in United Kingdom who Design and manufacture commercial and custom switching systems. These are used in the electronics test and switching systems in test automation. PXI instrument modules, Switching products based on proprietary chassis systems, on the open standard PXI system, PCI cards and on the VXI standard too.

Pickering Interfaces – PXI Instrumentation

The 41-180 Programmable Attenuator Module is available with either one or two independently programmable attenuators in a single width 3U PXI module.

PXI Instruments - Dual RF Attenuator 63dB in 1 dB steps

PXI Instruments – Dual RF Attenuator 63dB in 1 dB steps

Each attenuator uses high reliability mechanical switches to operate binary weight attenuator pads, providing attenuation values from 0 to 63dB in 1dB steps. Attenuator operating time is typically just 5ms, ensuring fast setting times.

Features Include

  • DC to 3 GHz attenuator
  • 1 dB attenuation resolution
  • Maximum attenuation 63 dB

Pickering Interfaces Ltd
Stephenson Road, Clacton On Sea, Essex, CO15 4NL, United Kingdom

Chauvin Arnoux – Instruments Marketing

French group in Europe in the marketing of professional electrical measurement instrumentation. Areas – Test & Measurement, Power Measurement, Temperature Measurement & Control, and related Services.

Chauvin Arnoux – Instruments Marketing

SCOPE IN@BOX virtual digital oscilloscopes

MTX 1052 - PC Oscilloscope

Communication with a 10 Mb Ethernet interface and is WiFi compatible. Virtual Oscilloscope, 2×150 MHz, SPO. It uses he PC’s display, as well as taking advantage of its memory for its recording capacity. Suitable for laboratory applications in education, research and development departments and electronics design teams.

MTX 1052 – PC Oscilloscope – Chauvin Arnoux

In some models Real-time FFT analyser (lin/log), recorder with dedicated ROLL mode simplifying adjustments, bandwidth limiters, 19 simultaneous automatic measurements with markers and cursors, etc. It may be available for MTX 1052.

4 1/2 Digit True RMS Bench Multimeter – B&K Precision

The 2831E takes typical multimeter measurements such as volts, ohms, and amps with great accuracy. It also has built-in math functions and USB connectivity,

4 1/2 Digit True RMS Bench Multimeter – B&K Precision

The limit operation lets you set and control the values that determine a HI / IN / LO status of subsequent measurements. The meter can be configured to emit an audible alarm when readings are outside of the configured limit.

2831 Digit True RMS Bench Multimeter

The meters can also be remotely controlled using application software (downloadable from the B&K website), which supports front panel emulation and data logging of measurement results.

Features Include –

  • Up to 50,000 count display resolution
  • 0.03% basic VDC accuracy
  • Built-in math functions: Rel, Max/Min, dBm, dB, %, Hold, Compare
  • Dual display to indicate two measurements simultaneously
  • CATI (1000 V)/CATII (300 V) protection
  • USB and RS232 (5491B only) interface
  • AC + DC True RMS
  • Up to 25 readings per second measurement rate

From – B&K Precision

BK Precision – Test and Measurement Products

Electronic Test Equipment – Power Supplies, Function Generators, Multimeters, DMM, Analyzers, Oscilloscopes.

BK Precision – Test and Measurement Products

“Specializing in the design and manufacture of high quality, cost-effective test and measurement products for over 50 years”

“Since its founding in 1951, B+K Precision Corporation has built a reputation for excellence in the design and manufacture of high-quality, reliable and cost-effective test and measurement products. B+K Precision is the fourth most recognized instrument brand in the United States. ”

The BK Precision model 4078 Dual Channel Arbitrary Waveform Generator uses direct digital synthesis to generate waveforms up to 400,000 points.

arbitrary waveform generator

An arbitrary waveform generator (AWG) is a piece of electronic test equipment used to generate electrical waveforms. These waveforms can be either repetitive or single-shot (once only) in which case some kind of triggering source is required (internal or external). The resulting waveforms can be injected into a device under test and analyzed as they progress through it, confirming the proper operation of the device or pinpointing a fault in it.

B&K Precision Corporation
22820 Savi Ranch Parkway Yorba Linda, CA 92887-4610, USA

UEi – Test and Measurement Instruments

Founded in Beaverton, OR in 1967, Universal Enterprises, Inc. is a leading manufacturer of portable testing and measuring equipment for the HVAC industry.

UEi – Test and Measurement Instruments

  • Combustion Analyzers
  • Clamp Meters
  • Temperature/Humidity Testers
  • Leak & Pressure Detectors

The DMEG3 Megohmeter allows you to predict, prevent and identify insulation failures that can cause appliance failure, ….

 

The DMEG3 Megohmeter

Features Include –

  • Large digital display shows the test function and measured value
  • 600V AC measurement capability
  • Insulation resistance ranges 0 – 2000 M?
  • Three test-voltage ranges (250, 500, 1000 V DC)
  • Live circuit warning light.
  • Precision resistance 0.01? with audible continuity.
  • 200 mA short-circuit continuity test current for high accuracy.

UEi Test Instruments
Portland, OR, 8625 SW Cascade Avenue, Beaverton, OR 97008, USA