Manufacturer of Test and Measurement Eequipment. They also have Broadcasting and Radiocommunication Solutions. Dr. Lothar Rohde and Dr. Hermann Schwarz set up shop under the name “Physikalisch-technisches Entwicklungslabor Dr. L. Rohde und Dr. H. Schwarz” (PTE)……… 75 Years Rohde & Schwarz
Rohde and Schwarz – Communications and RF Testing
“Rohde & Schwarz is an independent group of companies specializing in electronics. It is a leading supplier of solutions in the fields of test and measurement, broadcasting, radiomonitoring and radiolocation as well as mission-critical radiocommunications. Established more than 70 years ago, Rohde & Schwarz has a global presence and a dedicated service network in over 70 countries.”
R&S FSQ Signal Analyzer
“It offers very low phase noise, unsurpassed low residual EVM, a wide dynamic range and above-average accuracy, making it the ideal high-end measuring instrument for development applications, where tolerances and limit values must often be lower than defined in a standard.”
Manufacturers of electromagnetic pollution detectors. Assists in determining the safe distance from any EMR source.
AlphaLab – Test Instruments for EMI and RFI
Products Include – DC Gaussmeters, Electromagnetic pollution meter (magnetic, electric, microwave fields). For Static Electricity Surface DC Voltmeters. Others are AC Electric Field Meter, RF Field Strength Meter and Natural Electromagnetic (EM) Meter.
DC Milligauss Meter 3 Axis – AlphaLab
An improvement on the flux gate magnetometer, the AlphaLab DC Milligauss Meter measures magnetic fields (technically “flux density”) up to several times the strength of the Earth field. It has a resolution of 0.01 milligauss (1 nanotesla) and a range of +/-2000 milligauss (200 microteslas).
3005 South 300 West Salt Lake City, Utah 84115 USA
Economically priced, easily programmable, micro-processor based passive component tester for fast, precise impedance measurements.
QuadTech 1715 LCR Digibridge
For remote operation and automated system applications, the unit comes standard with an RS-232 interface, plus IEEE-488 and Handler interfaces are available as options.
Features Include –
- Measures 11 Impedance Parameters.
- 0.2% Basic Measurement Accuracy
- AC Test Voltages of 0.25 and 1.0V
- Fast Measurement Speeds up to 25/Second
- Test Frequencies of 100Hz, 120Hz, 1kHz, and 10kHz (9.6kHz)
- Automatic Open/Short Zeroing Eliminates Connection Errors
- LCD Display for Menu Programming and Test Results
- Hi/Lo Comparator Limits and 8 Sorting Bins for Pass/Fail Testing
- RS-223 Interface Standard, IEEE-488 and PLC Optional
QuadTech, Inc. founded as spinoff of GenRad’s Instrumentation Division – 1991.
The Megger MIT415 insulation and continuity tester is designed for electrical testing by utilities, industrial, commercial and domestic electricians.
Megger MIT415 – Electrical Testing Tool
- 10 V and 100 V ESD testing
- 25 V & 50 V signal cable insulation testing
- 250 V & 500 V Insulation testing up to 50 GΩ (500 V)
- Continuity testing at 200 mA or 20 mA from 0.01 Ω to 999 kΩ
- DC and TRMS AC voltage measurement
Megger – Electric Power Test Equipment
“For over 100 years, Megger has been the premier provider of electric test equipment and measuring instruments for electrical power applications.”
Designer and manufacturer of measuring instruments for industry, science, universities and schools. Since many years HAMEG serves the world market from its headquarters at Mainhausen in the Rhein – Main area.
Hameg Instruments – Test and Measurement
Oscilloscopes, Spectrum Analyzer, EMI Measurement, Power Supplies, Programmable Measuring Instruments Series 8100, Modular Systems Series 8000, Options and Accessories.
HM8012 – 4¾-Digit Programmable Multimeter
- 4 ¾ – digit display with 50,000 counts
- Basic accuracy 0.05%
- Max. Resolution: 10 μV, 0.01 dBm, 10 nA, 10 mΩ, 0.1 °C/°F
- Mainframe HM8001-2 required for operation
Digital multimeter PC20, Ethernet adapter KB-LAN, and software PC LINK PLUS. This configuration makes the digital multimeter PC20 to be used on an Ethernet LAN.
PC20 – LAN Ethernet DMM – Sanwa
- 3-3/4 digits 4000 count
- Data-hold function
- Range-hold function
- Capacitance measurement
Safety cover for the 4・10A terminal, Safety cap for AC adapter terminal, Protective holster with wall hanger and lead holder, Optical link RS232C / USB interface (optional).
Ethernet LAN / USB / RS-232C connections (optional). You can monitor the measurement environment on your web browser.
Sanwa Electric Test Instruments
Dempa Bldg., 4-4 Sotokanda 2-Chome, Chiyoda-ku, Tokyo, 101-0021. Japan.
Fluke test tools offer solutions in predictive maintenance, electrical testing, biomedical test, thermography, and plant maintenance. Manufactures, distributes and services electronic test tools.
Fluke Electronics – Industrial and Electrical TM
Product line of test and measurement instruments include digital multimeters, clamp meters, electrical testers, power quality analyzers, thermal imagers, insulation resistance testers, portable oscilloscopes, earth ground testers and many more.
Fluke 125 is the ScopeMeter of choice for the maintenance engineer who deals with industrial machinery and the industrial network connecting his machinery.
The ScopeMeter 125 combines a 40 or 20 MHz dual input digital storage oscilloscope, two true-RMS digital multimeters and a dual input TrendPlot™ recorder all in a compact, battery powered instrument. Leave all other test tools behind, the ScopeMeter 125 is the only tool you’ll need.