A Mixed Signal Oscilloscope (MSO) is a combination Logic Analyzer and Oscilloscope. Since all inputs sample simultaneously, it is easy to see the timing relationships of the digital and analog components of your circuit.
MSO-19 – Mixed Signal Oscilloscopes – Link Instruments
The palm-sized MSO-19 operates as a 2 GSa/s Oscilloscope, a 200 MSa/s Logic Analyzer, a 100 MSa/s Pattern Generator, and a Time Domain Reflectometer (TDR). All channels sample simultaneously at a max rate of 200 MSa/s.
Time synchronized Oscilloscope and Logic Analyzer inputs.
All 9 channels are sampled at the same time and are displayed together. This is better than separate instruments because the analog and digital waveforms are acquired with the same sample clock, assuring accurate time correlation between the two.
They design and manufacture portable Logic Analyzers and Digital Storage Oscilloscopes. Over the years, we have added Pattern Generation and Spectrum Analysis.
Link Instruments, Inc.
17A Daniel Rd. East Fairfield, NJ 07004 USA
Acquitek with its sisters companies, Gage Applied Technologies and KineticSystems Corporation who are leading manufacturers of high end, high performance modular instrumentations, like PCI, PXI, USB, VXI and CAMAC.
Acquitek France – Data Acquisition Solutions
The Ndigo5G-10 is a PCIe based flash-ADC with sample rates up to 5Gs/s and a resolution of 10 bits. With an onboard zero suppression and 800Mb/s PCIe interface it allows for high data throughput in applications where pulses or pulse trains are supposed to be recorded. Multiple boards can be used in sync to increase the number of channels.
Ndigo5G Pulses recorder
10 bits of sampling resolution. 4 channels with 1.25Gs/s, channel with 2.5Gs/s or 1 channel with 5Gs/s selectable. Bandwidth up to 3GHz 4 AC-coupled.
The ADQ 214 is a two channel data acquisition card featuring two 14-bit, 400 MSPS AD-converters and a USB 2.0 interface.
1 bis rue Marcel Paul, 91300 Massy, France
The LogicPort provides 34 channels sampled at 500MHz. This includes two state-clock inputs which function as normal sampled channels in timing-mode. The LogicPort is controlled and powered via your PC’s USB 1.1 or 2.0 port for the ultimate in convenience and portability.
PC-Based Logic Analyzer – Intronix
The LogicPort’s software includes interpreters for CAN, I2C, Synchronous Serial (SPI) and Asynchronous Serial (RS232) protocols. Its Synchronous Serial interpreter is very flexible and interprets 3-Wire, Microwire, PS/2 and other proprietary protocols in addition to SPI.
- Real-Time Sample Compression
- 500MHz Timing-Mode (Internal Clock)
- 200MHz State-Mode (External Clock)
- Advanced Multi-Level Triggering
- Built-in 300MHz Frequency Counter
- CAN, I2C, SPI and RS232 Interpreters
Manufacturer of high quality computer controlled test and measurement equipment, such as USB oscilloscopes, arbitrary waveform generators, spectrum analyzers, protocol analyzers, data loggers and multimeters. It is a Dutch company developing and selling computer controlled measuring instruments.
TiePie Engineering – Computer controlled Instruments
This powerful high speed USB oscilloscope combines fast sampling up to 500 MS/s with high resolutions of 12, 14 and 16 bit, a large memory of 64 MSamples and an extremely accurate built-in 30 MHz 14 bit arbitrary waveform generator.
Handyscope HS5 the unbeatable USB oscilloscope
A protocol analyzer is a measuring instrument that analyzes one or more signals that are used to communicate between electronic devices according a specific protocol. A protocol analyzer examines the signals and decodes the information that is transferred.The Multi Channel software contains the following protocol analyzers: CAN bus analyzer, J1939 decoder, I²C analyzer and Serial analyzer.
Protocol analyzers – TiePie
Koperslagersstraat 37 8601 WL Sneek The Netherlands
Leading designer, manufacturer, and provider of data acquisition solutions to the test and measurement market. With expertise in the design of high-accuracy, high-quality hardware and application software.
Data Acquisition Solutions – Data Translation
“The DT9837 is a highly accurate USB data acquisition module that is ideal for portable sound and vibration measurements. Four 24-bit IEPE (ICP) sensor inputs are synchronized with a tachometer input to provide data streams that are matched in time for field or laboratory use.”
- Runs on USB Power…ideal for portable applications…no external power supply needed
- Four Simultaneous, 24-bit Delta-Sigma A/D channels for high resolution measurements with support for IEPE inputs, including use of a 4mA current source and AC or DC coupling
- Up to 105.4kHz sampling rate per channel
- Tachometer input support in the A/D data stream for synchronizing measurements
Data Translation, Inc.
100 Locke Drive, Marlboro, MA 01752-1192, USA
Redfish Instruments, Inc. is headquartered in Santa Cruz, CA, and was founded by Patrick O’Hara, David Lavo, and Qiwei Xiao.
Wireless DMM from Redfish Instruments
A digital multimeter that wirelessly transmits voltage, current and resistance measurements via an 802.11 wifi connection to any Android device for enhanced visualization, data sharing, and data logging.
Users can acquire data, save it, email it, post it to a web server, or display it for further visualization. Using the integrated speech function, the iDVM can “speak” the measurement through your Phone or Tablet.
The iDVM lte allows data taken by any Fieldpiece accessory head to be wirelessly transmitted to your iOS or Android smart phone or tablet computer.
Redfish Instruments iDVM
The iDVM will permits you to measure voltage, current, and resistance from up to 30 yards away while still logging the data. Once you’ve captured the data you can use the many attributes of your Android devices to pinch, scroll, pan, and zoom your data.
Redfish Instruments, Inc.
303 Potrero Street, Suite 42-304 Santa Cruz, CA 95060
Environmental, Analytical, Lab or Industrial monitoring projects can apply the dataTaker to create web accessible solutions. Data Communications, Interfacing or Networkings is powerful with SDI-12 sensors, Modbus for SCADA systems and Web enabled features.
dataTaker – Web accessible solutions
The DT80 is a robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive communications capabilities and built-in display. The dataTaker DT80’s Dual Channel concept allows up to 10 isolated or 15 common referenced analog inputs to be used in many combinations.
dataTaker DT80 Intelligent Data Loggers
dEX datalogger software is an intuitive graphical interface that allows you to configure your data logger, view real-time data in mimics, trend charts or tables and retrieve your historical data for analysis.
Thermo Fisher Scientific Australia Pty Ltd
5 Caribbean Drive, Scoresby, VIC 3179