MR8847A – Memory HiCorder from HIOKI

Hioki Memory HiCorders are high-speed waveform monitoring and recording devices that can simultaneously measure multiple physical phenomena such as voltage, current, temperature, etc.

MR8847A – Memory HiCorder from HIOKI

The MR8847A performs multichannel measurement with simultaneous,  high-speed sampling of all channels at 20 MS/s.(resolution: 50 nsec)High-speed sampling allows you to measure the rising edge of pulses and detect anomaly operations and instantaneous waveforms that occur suddenly with high precision.

MR8847A - Memory HiCorder from HIOKI

Since you can directly input up to 1000 V DC and 700 V AC, a differential probe is no longer necessary. Maximum rated voltage to ground is 1000 V for CAT III and 600 V for CAT IV environments.

The MR8847A can perform one-signal FFT for analyzing frequency components, two-signal FFT for analyzing transfer functions, and octave analysis for acoustics.

HIOKI
81 Koizumi, Ueda, Nagano, 386-1192, Japan

HS33 Stick Meter DMM – Fieldpiece Instruments

Non-contact Voltage – Loud beeper and bright LED indicate the NCV tab is near AC voltages down to 24VAC.

True RMS (HS36) – Get the true voltage and amperage when testing variable speed fans or other non-sine wave applications.

HS33 Stick Meter DMM – Fieldpiece Instruments

HS33 Stick Meter DMM - Fieldpiece Instruments

Auto-ranging (HS35,HS36), Automatically changes range for best resolution.

Temperature (HS33,HS35,HS36), Thermocouple plugs in directly for accurate readings, even in fast changing environments.

Microamps (HS35,HS36), For flame rectifier diode tests. Capacitance For motor-run and motor-start capacitors. Frequency (HS35,HS36) For variable frequency drives. Rugged rubberized case with magnetic hanger. Hi-voltage indicators you can’t miss–both LED and beeper turn on to indicate you’ve touched a potentially dangerous voltage. Low ohms ranges for motor windings and mid range for thermistors.

Every HS30 series meter comes packaged inside the padded ANC1 4-pocket case. A 300AAC clamp head (ACH) is included. Just slide the clamp onto the top of the HS30 meter to read amps. Also included are deluxe silicone test leads, alligator clips, k-type thermocouple (HS33, HS35, HS36), battery (installed), operator’s manual, and RFM66 fuse..

“Fieldpiece is the HVACR instrument manufacturer that technicians turn to for meters, air flow, manifold, leak detectors, combustion, scales, A/C analysis and more.”

Fieldpiece Instruments, Inc. 
1900 E Wright Circle Anaheim CA 92806, USA.

1507 and 1503 Insulation Testers – Fluke

The Fluke 1507 and 1503 Insulation Testers are compact, rugged, reliable, and easy to use. With their multiple test voltages, they are ideal for many troubleshooting, commissioning, and preventative maintenance applications.

1507 and 1503 Insulation Testers - Fluke

Fluke 1507/1503 Insulation Resistance Testers

Insulation test range:

  • 1507: 0.01 MΩ to 10 GΩ
  • 1503: 0.1 MΩ to 2000 MΩ

Insulation test voltages:

  • 1507: 50 V, 100 V, 250 V, 500 V, 1000 V
  • 1503: 500 V, 1000 V

Features Include –

  • Save both time and money with Automatic calculation of Polarization Index and Dielectric Absorption Ratio (only available on the1507)
  • Auto-discharge of capacitive voltage for added user protection
  • AC/DC voltage: 0.1 V to 600 V
  • 200 mA Continuity
  • Resistance: 0.01 Ω to 20.00 kΩ

from Fluke

Digital Insulation Resistance Tester IR4056 Hioki

This is a Replacement for Digital Megohm HiTester 3454. A new Product that includes built-in rugged cases and test lead storage compartments.

Digital Insulation Resistance Tester IR4056  Hioki

This has an integrated AC/DC voltage meter, useful for testing solar power generation systems and electric vehicles.

Some Features

  • 5-range testing voltage of 50 V/100 MΩ to 1000 V/4000 MΩ
  • Continuity check via 200 mA testing
  • Bright LED, luminous LCD, test lead with bright LED lamp.
  • Live circuit indicator, Automatic electric discharge, Automatic DC/AC detection

Digital Insulation Resistance Tester IR4056-20- Hioki

Earlier Post at delabs on 11/12/08 – Digital Megohm HiTester 3454 – Hioki – Insulation resistance tester with continuity function. 250/500 V DC – 500 MΩ , 1000 V DC – 4000 MΩ

  • Easy-to-read digital display
  • Auto-discharge
  • Live-wire warning
  • Safety system for high voltage measurement
  • Sliding cover

Hioki – Electronic Measurement Instruments

HIOKI products – Automatic Test Equipment, Memory Recorders, Field Measurement Instruments, Electronic Measurement Instruments.

PS300 Series – High Voltage Power Supply – SRS

Industry standard HV Precision Lab power supplies with up to 20 kV output capability. GPIB and RS-232 computer interfaces are standard on all 10 W supplies.

All of the instruments are arc and short-circuit protected with separate programmable hard and soft current limits, making it possible to use them as constant current sources.

PS300 Series – High Voltage Power Supply – SRS

PS300 Series - High Voltage Power Supply - SRS

The PS310, PS325 and PS350 are dual-polarity, 25 W supplies, while the PS355, PS365, PS370 and PS375 are single-polarity, 10 W supplies. All of the instruments are arc and short-circuit protected with separate programmable hard and soft current limits, making it possible to use them as constant current sources.

Specs Include

  • 1 volt resolution
  • 0.001 % regulation
  • 0.05 % accuracy
  • Programmable limits and trips
  • 0.0015 % ripple

Stanford Research Systems, Inc.
1290-D Reamwood Avenue, Sunnyvale, CA 9408, USA.

Martel Electronics – Process Control Calibrators

Manufacturer of test and measurement equipment, including calibrators. These products are used in the installation and maintenance of industrial instrumentation and OEM applications.

Martel Electronics – Process Control Calibrators

Products Include – Bench Calibrators, Calibration Pumps, Current Calibrators, Gauge Calibrators, Pressure Calibration Gauge, Temperature Pressure calibrators, Multifunction Calibrators, HART Communicator and Documenting Calibrator.

3001 Lab Standard Multi-Function Precision Bench Calibrator

The Martel 3001 multi-function precision bench calibrator provides the power and features of calibrators costing thousands more. It combines the simulation and measurement of voltage, current, thermocouple, RTD and pressure with a second completely isolated measurement channel for an instrument unmatched in versatility, performance, and value.

Martel Electronics - Process Control Calibrators

The 3001 provides simple, front-panel entry of mode, range, and value, using either direct key-board entry or cursor entry. Using cursor entry , the LEFT/RIGHT arrow keys are used to move the cursor under the digit in the display to be changed.

Martel Electronics Corp
3 Corporate Park Dr, Unit 1, Derry, NH 03038, USA.

TTi – Thurlby Thandar Instruments

Designs and manufactures advanced electronic test and measurement equipment. Products they make include Power Supplies, Programmable power supply, Function generator, Arbitrary generator, Pulse generators, RF spectrum analyzer, DMM, LCR Meter and harmonic analyzers.

TTi – Thurlby Thandar Instruments

The LD400 is an inexpensive 400 watt electronic load which is suitable for testing and characterising a wide variety of dc power sources.

LD400 – DC Electronic Load – TTi

Its wide voltage/current range, multiple operating modes and built-in transient generator give it the versatility to offer test solutions from the design laboratory through to the component test area.

LD400 - DC Electronic Load - TTi

The LD400 can operate at voltages below 500mV for currents up to 10 amps. At higher currents the fixed minimum resistance (typically better than 25milliOhms) gradually raises the minimum operating voltage, but it remains below 1 volt up to 40 amps and below 2 volts up to 80 amps.

Aim and Thurlby Thandar Instruments,
Glebe Road, Huntingdon, Cambridgeshire PE29 7DR  England (United Kingdom)