Minidatalogger HD207 – Delta OHM

Stable and Reliable monitoring of temperature and relative humidity. Delta Log2 software helps record and analyze the recorded data in a PC. The datalogger functions of Start, Stop, Configuration, Data Download and Logging Interval can be selectable either from instrument or computer.

Minidatalogger HD207 – Delta OHM

Logging Capacity – 240K for one channel, 120K for two channels, 80K for 3 ch.

PC Interface Through a passive optoisolated RS232 serial port, 9600 bauds
Reading Interval Selectable among 1, 5, 10, 15, 30sec, 1, 5, 10, 15, 30min, 1hour.Minidatalogger HD207 - Delta OHM

Typical applications are: monitoring of temperature/humidity during transportation, storage of
fresh or frozen foods, fruit, vegetable products and flowers, pharmaceuticals, sensitive and photographic products, paper, explosives, as well as laboratory activities in general.

Delta OHM – Process and Environmental Instruments

Electronic instruments for the measuring of the following parameters: Temperature, Relative Humidity, Pressure, Light, Acoustics, pH, Conductivity, Dissolved Oxygen and Wind speed.

Delta Ohm S.r.L.
Via G.Marconi, 5 – 35030 Caselle di Selvazzano, Padova (PD) ITALIA

MR8847A – Memory HiCorder from HIOKI

Hioki Memory HiCorders are high-speed waveform monitoring and recording devices that can simultaneously measure multiple physical phenomena such as voltage, current, temperature, etc.

MR8847A – Memory HiCorder from HIOKI

The MR8847A performs multichannel measurement with simultaneous,  high-speed sampling of all channels at 20 MS/s.(resolution: 50 nsec)High-speed sampling allows you to measure the rising edge of pulses and detect anomaly operations and instantaneous waveforms that occur suddenly with high precision.

MR8847A - Memory HiCorder from HIOKI

Since you can directly input up to 1000 V DC and 700 V AC, a differential probe is no longer necessary. Maximum rated voltage to ground is 1000 V for CAT III and 600 V for CAT IV environments.

The MR8847A can perform one-signal FFT for analyzing frequency components, two-signal FFT for analyzing transfer functions, and octave analysis for acoustics.

HIOKI
81 Koizumi, Ueda, Nagano, 386-1192, Japan

Acquitek France – Data Acquisition Solutions

Acquitek with its sisters companies, Gage Applied Technologies and KineticSystems Corporation who are leading manufacturers of high end, high performance modular instrumentations, like PCI, PXI, USB, VXI and CAMAC.

Acquitek France – Data Acquisition Solutions

Ndigo5G Pulses recorder

The Ndigo5G-10 is a PCIe based flash-ADC with sample rates up to 5Gs/s and a resolution of 10 bits. With an onboard zero suppression and 800Mb/s PCIe interface it allows for high data throughput in applications where pulses or pulse trains are supposed to be recorded. Multiple boards can be used in sync to increase the number of channels.

Ndigo5G Pulses recorder

10 bits of sampling resolution. 4 channels with 1.25Gs/s, channel with 2.5Gs/s or 1 channel with 5Gs/s selectable. Bandwidth up to 3GHz 4 AC-coupled.

ADQ 214 two channel data acquisition card

The ADQ 214 is a two channel data acquisition card featuring two 14-bit, 400 MSPS AD-converters and a USB 2.0 interface.

Acquitek
1 bis rue Marcel Paul, 91300 Massy, France

Intelligent Instrumentation – Data Acquisition

Intelligent Instrumentation specializes in hardware and software for PC Data Acquisition. Some Products include solutions for Automation & Control, Digital I/O, Analog I/O, Ethernet I/O, EDAS (Ethernet Interface) and UDAS (USB Interface).

Intelligent Instrumentation – Data Acquisition

“Open architecture for easy implementation and deployment into existing and future IT infrastructures. It is exceptionally rugged, has no moving parts, and can be environmentally sealed against dust and water.”

Intelligent Instrumentation - Data Acquisition

LANpoint Power X Shop Floor Data Collection Terminals

“The open architecture and exceptional input/output device connectivity – serial, USB, bluetooth, direct Ethernet, even many digital I/O channels for switch sensing, counting, relay activating”
Easy to integrate, use and support, these data collection terminals are ideal for data capture and communications solutions for factory floor or other commercial environment.

Intelligent Instrumentation Inc.
3000 E. Valencia Road, Suite 100, Tucson, Arizona 85706 USA

Measurement Computing – Data Loggers

PC-based data acquisition hardware and software. Solutions for Temperature, Vibration, Strain Gage and Mixed Signal in PCI, Rack, Standalone and portable types. Ethernet, USB and Wireless Interfacing.

Measurement Computing – Data Loggers

Here is a complete system, it comes with TracerDAQ an Out-of-the-Box Virtual Instrument Suite. Acquire, analyze, display data, and generate signals within minutes.

WLS-TC-ValuePack from Measurement Computing

WLS-TC-ValuePack from Measurement Computing

Includes WLS-TC (wireless-based 8-channel thermocouple input module) plus WLS-IFC (USB-to-wireless interface module)

Measurement Computing Corporation
10 Commerce Way, Norton, MA 02766, USA

DATAQ Instruments – Data Acquisition

A leading supplier of data acquisition hardware and software systems for PCs. They have Starter Kits like the e DI-145 a low-cost starter kit.

DATAQ Instruments – Data Acquisition

Products the deal with include Data Loggers, Temperature and Humidity Data Loggers, PLC Data Acquisition Solutions, USB Data Loggers and Wireless Data Loggers.

The Ethernet Data Acquisition and Isolated Industrial Ethernet Data Acquisition are useful Industrial Solutions.

DATAQ Instruments - Data Acquisition

DI-718B Data Logger shown above operate Stand-alone or PC-connected.

The DI-718B is an eight-channel, DI-8B module data logger system. Each DI-718B accepts up to eight high-performance, plug-in (DI-8B) signal conditioning modules to include virtually any isolated, industrial-type signal. Because DI-8B modules are identical in pinout and size, they can be mixed or matched in any combination. Choose from thermocouple, true rms, voltage, strain, frequency, process current, RTD, potentiometric, or DC transducer-whatever suits your application. A erasable sticker on the top of the instrument allows easy identification of all installed DI-8B modules.

Ethernet Data Acquisition – DATAQ

These Use the DI-715B Series with 5B style isolated amplifier modules or the DI-718B Series with 8B style isolated amplifier modules for fully isolated industrial signal conditioning applications. Over 90 module types provides a wide variety of measurement functions and ranges. Modules may be mixed and matched to specifically meet your application.

DATAQ Instruments, Inc.
241 Springside Drive Akron, OH 44333, USA.

Data Acquisition Solutions – Data Translation

Leading designer, manufacturer, and provider of data acquisition solutions to the test and measurement market. With expertise in the design of high-accuracy, high-quality hardware and application software.

Data Acquisition Solutions – Data Translation

Data Acquisition Solutions - Data Translation

“The DT9837 is a highly accurate USB data acquisition module that is ideal for portable sound and vibration measurements. Four 24-bit IEPE (ICP) sensor inputs are synchronized with a tachometer input to provide data streams that are matched in time for field or laboratory use.”

DT9837 accurate USB data acquisition .datatranslation

Some Features

  • Runs on USB Power…ideal for portable applications…no external power supply needed
  • Four Simultaneous, 24-bit Delta-Sigma A/D channels for high resolution measurements with support for IEPE inputs, including use of a 4mA current source and AC or DC coupling
  • Up to 105.4kHz sampling rate per channel
  • Tachometer input support in the A/D data stream for synchronizing measurements

Data Translation, Inc.
100 Locke Drive, Marlboro, MA 01752-1192, USA