The 2831E takes typical multimeter measurements such as volts, ohms, and amps with great accuracy. It also has built-in math functions and USB connectivity,
4 1/2 Digit True RMS Bench Multimeter – B&K Precision
The limit operation lets you set and control the values that determine a HI / IN / LO status of subsequent measurements. The meter can be configured to emit an audible alarm when readings are outside of the configured limit.
The meters can also be remotely controlled using application software (downloadable from the B&K website), which supports front panel emulation and data logging of measurement results.
Features Include –
- Up to 50,000 count display resolution
- 0.03% basic VDC accuracy
- Built-in math functions: Rel, Max/Min, dBm, dB, %, Hold, Compare
- Dual display to indicate two measurements simultaneously
- CATI (1000 V)/CATII (300 V) protection
- USB and RS232 (5491B only) interface
- AC + DC True RMS
- Up to 25 readings per second measurement rate
From – B&K Precision
Electronic Test Equipment – Power Supplies, Function Generators, Multimeters, DMM, Analyzers, Oscilloscopes.
BK Precision – Test and Measurement Products
“Specializing in the design and manufacture of high quality, cost-effective test and measurement products for over 50 years”
“Since its founding in 1951, B+K Precision Corporation has built a reputation for excellence in the design and manufacture of high-quality, reliable and cost-effective test and measurement products. B+K Precision is the fourth most recognized instrument brand in the United States. ”
The BK Precision model 4078 Dual Channel Arbitrary Waveform Generator uses direct digital synthesis to generate waveforms up to 400,000 points.
An arbitrary waveform generator (AWG) is a piece of electronic test equipment used to generate electrical waveforms. These waveforms can be either repetitive or single-shot (once only) in which case some kind of triggering source is required (internal or external). The resulting waveforms can be injected into a device under test and analyzed as they progress through it, confirming the proper operation of the device or pinpointing a fault in it.
B&K Precision Corporation
22820 Savi Ranch Parkway Yorba Linda, CA 92887-4610, USA
Hand Held Instruments For HVAC/R Installation And Maintenence. Fieldpiece is the creator of the modular digital multimeters called Stick Meters.
Fieldpiece Instruments – HVAC-R Maintenence
The “stick” style digital multimeter (DMM) combined with accessory heads make it easy to make electrical readings in the field and enables the technician to easily test a wide range of other parameters.
Highlights of Types of Stick Meters
Below is the HS36 – True RMS with Backlight.It includes the ranges you use everyday for HVACR field service plus includes a bright blue backlight and True RMS. Like the rest of the HS30 series, the HS36 comes equipped with a magnetic hanger.
Loud beeper and bright LED indicate the NCV tab is near AC voltages down to 24VAC.
Get the true voltage and amperage when testing variable speed fans or other non-sine wave applications.
- Microamps – For flame rectifier diode tests.
- Capacitance – For motor-run and motor-start capacitors.
- Frequency – For variable frequency drives.
- Temperature – Thermocouple plugs in directly
Rugged rubberized case with magnetic hanger. Hi-voltage indicators you can’t miss–both LED and beeper. Continuity indicated by LED and beeper.
Fieldpiece Instruments, Inc.
1900 E Wright Circle Anaheim, CA 92806, USA.
KYORITSU is a Company in Japan Manufacturing Quality Test and Measurement Instrumentation for Electrical Safety, Electrical Quality, Maintenance and Testing. They have a Manufacturing and R&D at Ehime, Japan.
KYORITSU – Instrumentation for Electrical Testing
History – 1940 – Mr. Takeo Kuramoto established Kyoritsu Electronic Research Institute and started to manufacture electric materials.
The products being Manuafctured and Developed include Multimeters, Clamp Meters, Insulation / Continuity Testers, Earth Testers, LOOP/PSC Testers, RCD Testers, Power Quality Analyzer, Power Meters, Phase Indicators, Illuminometers etc.
Earth Resistance & Resistivity Tester
Several sub-results can be shown on the display: Resistance of the Auxiliary Earth Spikes, Frequency of Test Current, Voltage and Frequency of Interference (noise), Residual Resistance Rk, etc.
Some Features –
- High test current up to 80mA yielding resolution of 0.001? on 2? range.
- Warning for excessive noise and high Auxiliary Earth Spikes resistance.
- Large Graphic Display with backlight for readings in poorly illuminated areas.
Designer and manufacturer of measuring instruments for industry, science, universities and schools. Since many years HAMEG serves the world market from its headquarters at Mainhausen in the Rhein – Main area.
Hameg Instruments – Test and Measurement
Oscilloscopes, Spectrum Analyzer, EMI Measurement, Power Supplies, Programmable Measuring Instruments Series 8100, Modular Systems Series 8000, Options and Accessories.
HM8012 – 4¾-Digit Programmable Multimeter
- 4 ¾ – digit display with 50,000 counts
- Basic accuracy 0.05%
- Max. Resolution: 10 μV, 0.01 dBm, 10 nA, 10 mΩ, 0.1 °C/°F
- Mainframe HM8001-2 required for operation
Digital multimeter PC20, Ethernet adapter KB-LAN, and software PC LINK PLUS. This configuration makes the digital multimeter PC20 to be used on an Ethernet LAN.
PC20 – LAN Ethernet DMM – Sanwa
- 3-3/4 digits 4000 count
- Data-hold function
- Range-hold function
- Capacitance measurement
Safety cover for the 4・10A terminal, Safety cap for AC adapter terminal, Protective holster with wall hanger and lead holder, Optical link RS232C / USB interface (optional).
Ethernet LAN / USB / RS-232C connections (optional). You can monitor the measurement environment on your web browser.
Sanwa Electric Test Instruments
Dempa Bldg., 4-4 Sotokanda 2-Chome, Chiyoda-ku, Tokyo, 101-0021. Japan.
Fluke test tools offer solutions in predictive maintenance, electrical testing, biomedical test, thermography, and plant maintenance. Manufactures, distributes and services electronic test tools.
Fluke Electronics – Industrial and Electrical TM
Product line of test and measurement instruments include digital multimeters, clamp meters, electrical testers, power quality analyzers, thermal imagers, insulation resistance testers, portable oscilloscopes, earth ground testers and many more.
Fluke 125 is the ScopeMeter of choice for the maintenance engineer who deals with industrial machinery and the industrial network connecting his machinery.
The ScopeMeter 125 combines a 40 or 20 MHz dual input digital storage oscilloscope, two true-RMS digital multimeters and a dual input TrendPlot™ recorder all in a compact, battery powered instrument. Leave all other test tools behind, the ScopeMeter 125 is the only tool you’ll need.