• Ads

Extech Instruments – Measurement Instruments

Extech a Division of FLIR System is a source for many test and measurement instruments. They also have Thermal imaging cameras and Portable printers.

Extech Instruments – Measurement Instruments

The instruments include multimeters, clamp meters, electrical testers, and environmental meters for the measurement of light, sound, temperature, humidity, airflow, RPMs, and water quality.

MS6100 Oscilloscope

MS6100 – 100MHz 2-Channel Digital Oscilloscope

One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform

Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames.

Built-in 6,000 count True RMS MultiMeter with analog bargraph

Extech Instruments Corporation
9 Townsend West Nashua, NH 03063 U.S.A.

Cleverscope – USB mixed signal oscilloscope

A USB connected, PC hosted oscilloscope and spectrum analyser with PC based application software.

Cleverscope Model CS328A Oscilloscope

The cleverscope CS328A is a USB 2.0 connected mixed signal PC oscilloscope which brings benefits to the user that are unavailable from traditional stand-alone oscilloscopes .

Cleverscope - USB mixed signal oscilloscope

Cleverscope has complex triggering capability. Find a glitch, runt or a slow rise time problem by setting the dual triggers appropriately. Can your present scope trigger on a negative runt occurring in 0.1% of pulses?

Two 10, 12 or 14 bit analog channels sampling simultaneously at 100 MSa/sec. AC or DC coupled.

USB 2.0 Interface to the PC or 10/100Mbit ethernet, depending on option

Gain automatically set from 20 mV FSD to +/-200V FSD by choosing graph view and probe switch setting.

Offset automatically set to correspond to the selected amplitude axis view. As an example a graph with amplitude axis of 2.40 to 2.42V automatically chooses a 20mV range offset by +2.40V – good for looking at small signals in single supply op-amp applications.

Analog triggering of the waveform in view with a resolution of 1% of the display height. The analog trigger may optionally be conditioned with a low pass, high pass or noise filter.