• Tech Ads

Tag Archives: Component-Testing

Lake Shore Cryotronics – Measurement and Control Technologies

By | |
Comments Off on Lake Shore Cryotronics – Measurement and Control Technologies

Lake Shore Cryotronics, Inc. is an international leader in developing innovative measurement and control solutions. Their products include sensors for cryogenic temperature and magnetic measurements as well as systems for the magnetic and electronic characterization of materials.

Lake Shore Cryotronics – Measurement and Control Technologies

The Model 372 provides the best possible temperature measurement and control capabilities for dilution refrigerators (DRs) that are intended to be operated below 100 mK. The Model 372 makes it easy to perform multiple tasks that were once very difficult to perform reliably at ultra-low temperatures:

Lake Shore Cryotronics 372 AC Resistance Bridge

Model 372 AC Resistance Bridge/Temperature Controller

Measure a wide range of resistive devices – With up to 22 different current (I) excitation levels available, the Model 372 is able to perform accurate impedance measurements from several microohms (10-6 Ω) to many megohms (106  Ω), all while keeping power dissipation levels to an absolute minimum.

Lake Shore Cryotronics, Inc.
575 McCorkle Blvd, Westerville, OH 43082, USA

Ametek – Electronic Instruments – Electromechanical

By | |
Comments Off on Ametek – Electronic Instruments – Electromechanical

A leading manufacturer of Electronic Instruments and Systems for advanced monitoring, testing, calibrating, and display. A specialized supplier of Electromechanical components like electrical interconnects, electric motors, Cable Systems and Ceramic Seals.

Ametek – Electronic Instruments – Electromechanical

The product line includes solutions in Data Acquisition, Motion Control Products, Thermal Management Systems. They also have Materials Analysis & Detection systems and Power Electronics systems like AC/DC Programmable Power Sources.

Process Control – Level, Pressure, Temperature, Calibration, Position, Automation

AMETEK Brinell Optical Scanning System
“The B.O.S.S. represents the most significant technological improvement to Brinell testing since the test was first introduced. It measures Brinell impressions faster, more accurately and more consistently than any other solution, and it improves quality control with advanced data acquisition and analysis capabilities.”

CE Certification for Innovative Brinell Optical Scanning System

AMETEK, Inc.
1100 Cassatt Road P.O. Box 1764 Berwyn, PA 19312 USA.

Leap Electronic – IC Test and Custom Equipment

By | |
Comments Off on Leap Electronic – IC Test and Custom Equipment

Established in 1980 and located in TangChen Industrial Park, Sanchung city, Taipei. They have systems and solutions in the field of IC test and programming equipments. Component Testing equipment too.

Leap Electronic – IC Test and Custom Equipment

The Products the make include IC programmers and Testers. Learning Kits and Emulators. They also have Logic Analyzers and Power Supplies. Automated Programming Systems too.

IWT-5000A winding tester is a coil (such as voltage transformer, inductance, motor) testing instrument that tests self-insulating property of the coil. The influences of winding materials, magnetic materials, and framework, also extra fabrication decreases the insulating property of coil layers along with the jumpers and jacks.

Impulse Winding Tester

Leap Electronic
6F-4, No.4, Ln.609, Sec.5, Chongxin Rd., Sanchong Dist., New Taipei City 24159, Taiwan, ROC

Cirris Systems – Cable and harness test equipment

By | |
Comments Off on Cirris Systems – Cable and harness test equipment

Cable Testers, Harness Testers or Hipot Testers for cable testing PCBs, Components, Resistance Test.

Signature 500 Cirris Systems

Cirris Systems – Cable and harness test equipment

“Cirris cable testers range from a $600 battery-operated “toolbox” unit for use by field service personnel, to a high-end testers capable of testing harnesses with thousands of wires.”

Signature 500 Cirris Systems

Twisted Pair & Installed Cable Testing. (not CE marked)

The Signature 500 is unique in its ability to test installed cables for opens, shorts, mis-wires, and proper twisting of twisted pairs.

Highlights

  • Test Points: 64 (128 with second tester)
  • Test Voltage: 9VDC, 1.8mA max
  • Continuity threshold: 4K ohms
  • Components: Twisted Pairs

Cirris Systems Corp.
1991 Parkway Blvd., Salt Lake City, UT 84119 USA.